Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

How to flash MTK devices using SP Flash Tool
Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem

TECNO F5 QUICK SPECS
 Dual-SIM
Dimensions: 127 x 63 x 9.2 mm
Storage: 4GB built-in storage (1GB available), supports up to 32GB microSD card
Display: 4.0-inch Capacitive IPS Display (480 x 800 pixel resolution, 233 ppi)
Rear Camera: 5MP Camera with Flash, Autofocus, & video
Front Camera: 2MP front facing camera
OS Platform: Android 4.2.2 OS (Jelly Bean)
Processor: 1.3GHz Dual-core Processor
Memory: 1 GB RAM
GSM/EDGE 900/1800MHz
WCDMA 2100MHz
1500 mAH Battery Capacity

TECNO F5 STOCK ROM
F5-J213-20140818
DOWNLOAD

F5-J213-20140715

 Learn how to easily download files from Mega
PC or Mobile

Report if you cannot download any of these files.
Like and share

Donate to support this site

Post a Comment