How to flash stock rom using SP tool.

How to flash Stock rom of micromax canvas juice 2 .

Here step by step guide for flash stock rom of micromax canvas juice 2 ;-

Step 1: Install USB drivers on your computer. In case Android USB Drivers are already installed on your Computer then skip this step. ( you will find it on your downloaded zip )

Step 2 : Now extract your firmware rar file on your computer. You will see content like system.IMG , recovery.IMG etc 

Step 3 :Then Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see some files.

Step 4 : Now Open Flash_tool.exe .

Step 5 : Once Smart Phone Flash Tool is launched, Click on the Download Tab.

Step 6: In the Download Tab, now click on the scatter-loading button.

Step 7: Now, Locate the Scatter File (you will find the scatter file in the Stock rom folder where you extract your rom RAR file).

Step 8 : Now power off your smartphone .

Step 9: Now, Click on the Download Button to begin the Flashing Process.

Step 10: After press Download button  Now, Connect your Smartphone to the Computer using USB Cable .then your computer will detect your smartphone.

Step 11 :  after connect your device you will see yellow line in bottom on sp tool means your flashing process  started.if it will not detect your mobile then you want to install USB drivers again.

Step 12 : Once Flashing is completed, a Green Ring will appear.

Step 12: Close the Smart Phone Flash Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, Now your Android Smartphone is successfully running the Stock Rom you have Downloaded.

Thank you...