Note.
Battery should be at least 15%
Flash the exact pac file of your device
Do this at your own risk!
Watch video tutorial from here
Download and install Spreadtrum usb drivers from here or manually install it using this tutorial here
Download the .pac file (Stock ROM) of the device you want to flash.
Download and extract Spreadtrum UpgradeDownload tool from here
Launch UpgradeDownload Tool
Click on Load button.
Navigate and select the pac file of the device you downloaded.
Wait for it to load
Click on Start button.
Remove your phone battery and insert it back
Hold volume down and connect your device to the computer with a usb
Your device will be detected and flashing process will begin.
This process can take about 10 mins
When you see a green PASSED on progress bar, the process is complete.
Wait for some seconds then disconnect your phone from the computer
Reboot the device.
First boot after this process is longer than usual.
Spreadtrum upgrade tool is used to flash roms in pac format. If you want to flash roms with scatter files,
use sp flash tool
Download and install Spreadtrum usb drivers from here or manually install it using this tutorial here
Download the .pac file (Stock ROM) of the device you want to flash.
Download and extract Spreadtrum UpgradeDownload tool from here
Launch UpgradeDownload Tool
Click on Load button.
Navigate and select the pac file of the device you downloaded.
Wait for it to load
Click on Start button.
Remove your phone battery and insert it back
Hold volume down and connect your device to the computer with a usb
Your device will be detected and flashing process will begin.
This process can take about 10 mins
When you see a green PASSED on progress bar, the process is complete.
Wait for some seconds then disconnect your phone from the computer
Reboot the device.
First boot after this process is longer than usual.
Spreadtrum upgrade tool is used to flash roms in pac format. If you want to flash roms with scatter files,
use sp flash tool
إرسال تعليق